BSPT is based on the Whitworth
thread form - a symmetrical
V-thread with an angle of
55°. BSPT has been widely
adopted internationally for
interconnecting and sealing
pipe ends by mating an
external (male) with an
internal (female) thread. The
thread diameter increases
along the length of the thread
allowing the coupled pipes to
form a seal when torqued as
the flanks of the threads
compress against each other.
Features:
British Standard Pipe Taper
(RC Series Pipe Taper)
BSPT has been widely adopted
internationally for
interconnecting and sealing
pipe ends
The thread diameter increases
along the length of the thread
allowing the coupled pipes to
form a seal when torqued
Bottoming taps have a lead of
two threads and are used to
ensure minimum thread run-out
when tapping to the bottom of
a blind hole.
Bottoming taps have a lead of
two threads and are used to
ensure minimum thread run-out
when tapping to the bottom of
a blind hole.
Manufactured from high speed
steel material to
International DIN standards.
The loose range of taps are
available in Taper, Bottoming
and Intermediate styles in all
sizes.
Suitable for materials up to
1000N/mm2.
Suitable for both hand &
machine operation.
The taps are bright finished
with straight flute.
Specifications:
Size - 1/8"
Lead - Bottoming
Thread Form - BSPT
Material - High Speed Steel
(HSS)